Click image to view full size image
NACF.500J-S5/V Current Transducer
Applications
For the electronic measurement of currents: AC, DC，pulsed…, with galvanic separation between the primary circuits and the secondary circuits.
Advantages |
Applications |
Standards |
Small size and space savings |
Static converters |
EN 50178: 1997 |
Main electrical data(@±IPN, RL = 10 kΩ, TA = 25℃) | |
Primary nominal current |
500A |
Primary current measuring range |
±1500A |
Supply voltage |
DC±15(1±5%)V |
Current consumption |
≤±20mA |
Output voltage |
±4V |
Output internal resistance |
100Ω |
Load resistance |
≥10kΩ |
Accuracy - Dynamic performance data | |
Accuracy(excluding offset) |
≤±1%of IPN |
Linearity error |
≤±1%of IPN |
Electrical offset voltage |
≤±20mV |
Hysteresis offset voltage |
≤±30mV |
Temperature coefficient of δZt |
≤±1mV/℃ |
Temperature coefficient of VOUT |
≤±0.1%/℃ |
Step response time to 90 % of IPN |
≤5µS |
Frequency bandwidth (−3dB) |
DC … 25kHz |
General data | |
Ambient operating temperature |
-40~+85℃ |
Ambient storage temperature |
-45~+90℃ |
Mass |
≤460g |
Insulation coordination | |
Voltage for AC insulation test, 50Hz,1min |
5kV |
Isolation resistance |
≥1000MΩ |
Creepage distance |
15.7mm |
Clearance |
12.7mm |
NACF.500J-S5/V Dimensions NACF.500J-S5/V Series (in mm)
Connection
Mechanical Characteristics | |
General tolerance |
±1 mm |
Transducer fastening |
1 hole and 1 notch ø5.5mm |
Transducer fastening |
1 hole and 2 notches ø 5.5mm |
Recommended fastening torque |
1.5 N·m |
Primary through-hole |
64×21mm |
Connection of secondary |
Molex 22-04-1041 |
http://www.nb-csrsensor.com/